We have created a awesome theme
Far far away,behind the word mountains, far from the countries

PRODUCT >DA-600S-TOXI or O₂₂

PRODUCT

DA-600S-TOXI or O₂

DA-600

DA-600S-TOXI or O₂

Introduction
The DA-600S-TOXI detector is an electrochemical detector that uses a full-color LCD and RGB LED to enhance visibility and warning indication. The DA-600S-TOXI meter is a product suitable for measuring toxic gases using an electrochemical sensor. The DA-600S -TOXI sensor consists of a working electrode, a reference electrode, a counter electrode, and an electrolyte. When gas is exposed to the sensor, an electrochemical reaction occurs at the working electrode, causing oxidation or reduction, and this
Specification
Specification
Measuring Range PPB, PPM, %VOL
Size 191(W) x 158(H) x 135(D)
Weight 3.8kg
Display 2.4″ TFT LCD
Screen size 48.96mm × 36.72mm(2.4inch)
Screen display 5magnetic switches with led confirmation
Warning light RGB Color :RED, Orange, Green
Measuring principle Electronic chemical
Measuring gas See the gas list
Detection Time(T90) >15 Sec
Temperature -40℃~55℃
Humidity 0~95%RH(Non condensing)
Mechanical interface 2 x 3/4″NPT
INPUT POWER DC 20~30V, Maximum power of 10Watts
Outputs 4-20mA, Rs485 modbus, Relay x 2SPST(220V AC : 0.3A)
Certification Ex db IIC T6 Gb(IP6X), Ex tb IIIC T85℃ Db(IP6X)
Measuring method Sampling
Wire conduit 3/4” NPT
Installation type Wall or Pipe Station
Exterior material Cast Aluminum Alloy
Downlaod